If you’ve found what looks to be your dream home but are intimidated by the presence of a well, you’re not alone. This is a more common issue than you think, and if you’ve lived on a municipal water supply your whole life, it’s hard to blame you for having some initial anxiety. On the other hand, if you grew up on well water but never had to manage yourself, you can definitely learn some things. Like any other system on your property, a well is something you can learn to take proper care of. Before you begin, though, the process of inspecting a well is essential.
Testing is Important
When you’re buying a new home, you want to know that the water supply is in good working order. Check the water flow at various capacities – For example, if a sink and shower are running or how it operates when other utilities are using water. A well in excellent condition with inadequate supporting equipment is just as bad as a broken well, but the water condition is even more critical.
A drilled well is essential to have high-quality water, but properties that are too high above the water table might have insufficient pressure even with an artesian well. At the same time, one that is too low runs the risk of being susceptible to contamination. There are several tests to run on the well to be sure it will meet your needs. Most state home inspectors and realtors won’t know how to test well water, so you’ll want to hire a professional to get you the results you need.
Check Out the Equipment
Since much of your well equipment is above-ground, this is often the first thing an inspector will go over. A professional will note any repairs that you need, examine filters and pumps, pressure tanks, well caps. Every component of the well needs inspecting. However, even a perfectly functioning well can pump lousy water.
Test the Water
These tests typically come after and run the gamut of searching for contaminants in the water to examine the water flow rate. If these tests are failed, professionals will be able to serve you and help get the water in your well back up to code, and these costs should be factored in when negotiating the price of a property.
Check your Surroundings
Chances are, if you’re using a well for your water, you do not have a connection to any municipal sewer system and will have a septic tank. These will also need to be checked – But one of the most important checks is if your septic system is at least a hundred feet from your well, though an acre or two is ideal as these will almost always leak and require work at some point. Other potential sites of contamination include cesspits, livestock areas, chemical storage units, and roads. You’ll want your well to be far away from all of these. Run-off always makes its way into the soil or water table eventually, and some things can pose a hazard to your well and make the water undrinkable or damage your equipment.
Ask the Experts
If that sounds like a lot, it is – and these are only the bare minimum essential considerations. Things like the age of the well and the repair history also factor in, and a professional is the best way to go about inspecting your well. A good well can last you up to 50 years, while a struggling well can seriously complicate your life in a new home. Rather than go in blind, call the experts at American Pump Services.